Lightning

COMLEC

Home

Products

About Us

Technologies

Site Map

Contact us

Lightning & Surge Protection

19" Rackmount Products PROTECTION

	POWER CONDITIONING PH-01LS RACK ILLUMINATOR RH-01RI Features PH-01LS / RH-01RI 2u 15 Amp 3300 watts 230 Volt 50Hz single phase 10 IEC socket accessory outlets Overload circuit breaker protected Illuminated power switch Double cascade spike, surge and lightning protection 100dB attentuation EMI/RFI filtration 120 Volt 60Hz version available *Two retractable swivel light version available Electrical Specifications Static Conditions @ 25°CMains Maximum continuous voltage 250V rms Max continuous current (110/115V models available on request) 5, 10, 15, 20 or 30A Typical earth leakage current <2mA Operating temperature –10° to +55°C Transient Conditions @ 25°C Mains Max voltage withstand (1.2/50µs) >6kVA Max current withstand (8/20µs) >6kA Typical earth leakage current <2mA Max energy withstand (per wire) 140 Joules Typical clamping voltage 570V Typical response time <25nS Stock Numbers 01-100 01-500 : With retractable swivel lights		POWER CONDITIONING RACK DISTRIBUTION PH-06LS Features Power Conditioning Rack Distribution PH-06LS 2u 15 Amp 3300 watts 230 Volt 50Hz single phase 6 socket accessory outlets Overload circuit breaker protected Illuminated power switch Double cascade, spike, surge and lightning protection 100dB attenuation EMI/RFI filtration 120 Volt versions available Electrical Specifications Static Conditions @ 25°C Mains Maximum continuous voltage 250V rms Max continuous current (110/115V models available on request) 5, 10, 15, 20 or 30A Typical earth leakage current <2mA Operating temperature –10° to +55°C Transient Conditions @ 25°C Mains Max voltage withstand (1.2/50µs) >6kV Max current withstand (8/20µs) >6kA Typical earth leakage current <2mA Max energy withstand (per wire) 140 Joules Typical clamping voltage 570V Typical response time <25nS Stock Numbers 01-001 01-001 SA 01-001 UK 01-001 AUS
	LINE INTERACTIVE UPS POWER DISTRIBUTION Features Line Interactive UPS Power Distribution Line interactive UPS 2200VA/1500 Watts. Battery replacement indicator Built-in on-line stabiliser DC voltage power-on available Protects against power outages, over voltages, brownouts, lightning and surges 6 IEC socket accessory outlets Overload circuit breaker protected Illuminated power switch Technical Data Model PH-22U Input Specifications Voltage 230V ± 20% Frequency 50Hz Filtration -double cascade spike, surge and lightning protection 100dB attenuation EMI/RFI Transient Conditions @ 25°C Max voltage withstand (1.2/50µs) >6kV Max current withstand per line (8/20µs) >6kA Typical earth leakage current >2mA Max energy withstand (per wire) 140 Joules Typical clamping voltage 570V Typical response time <25nS Dimensions 3U Weight 28 kgs Output Specifications Output Frequency stability 1000ppm Voltage regulation AC line mode: ±8%, inverter mode: ±8% Waveform Simulated sinewave Transfer Time Mains to inverter <3ms Inverter to mains <1ms Protection Over voltage Line to inverter at 120% Line to inverter at 80% Under voltage Line to inverter at 80% Inverter to line at 82% Overload and short circuit Inverter mode: Electronic circuit shutdown AC mode: Fuse protection Lightning and surge ANSI / IEEE 587 Cat. A AC mode: Fuse protection Battery Recharge to 90% 6 - 8 hrs Back up time Computer load 15 - 30 mins Indicator Multi-function LED Display Normal, Autonomy, Overload, Battery fault Audible Alarm AC failure Sounds every 4 seconds and then auto stop in about 40 seconds Battery low Sounds every second till auto shut-down Battery fault Continuous alarm Interface 9 pin DB-9 Connector Support Novell Netware, MS-DOS, MS-Windows, LAN, Windows NT Environment Temperature 0°C to 40°C Relative Humidity 0 - 90% Weight 28kgs Stock Number 01-220 115V 60Hz model available		LINE VOLTAGE CONDITIONING POWER DISTRIBUTION Features Line Voltage Conditioning Power Distribution Automatic voltage regulator Corrects over and under voltage Protects against dips, sags, brownouts, over voltages, lightning and spike problems IEC socket accessory outlets Overload circuit breaker protected Illuminated power switch Delay time function Delay off function VA efficieny 95-99% Input power factor >, 0.95 Technical Data Model PH-3K PH-5K Output Capacity 3000 VA 5000VA 3000W 5000W Input Voltage Range ±6% Nominal +12% Nominal + 20% Voltage – 25% Voltage – 25% ±10% Nominal +15% Nominal +26% Voltage –27% Voltage –30% Input Range 140V - 280V 154V - 274V Power Factor - Input 0.95 ~ 1 0.95 ~ 1 Power Factor - Output ±0.7 ~ 1 ±0.7 ~ 1 Power Factor - Output ±0.7 ~ 1 ±0.7 ~ 1 Input frequency 50 Hz ± 5% 50Hz ± 5% Volt meter No Yes Power on Indicates power on status Indicates power on status LED’s bypass None Indicates status of bypass Over/under voltage Indicates the over/under voltage status Accessory outlets 6 10 Transient Conditions @ 25°C Max voltage withstand (1.2/50µs) >6kV Max current withstand per line (8/20µs) >6kA Max energy withstand (per wire) 140 Joules Peak EMI/RFI noise attenuation (approx) 100dB Typical clamping voltage 570V Typical response time <25nS Dimensions 3U Weight 10.5 kgs / 10.2 kgs Stock Numbers 01-300 01-500 115V 60Hz model available
	Request for Technical Specifications		Back to Lightning Protection

Home

Products and Services

Corporate Structure

Technologies

Site Map

COMLEC PTE LTD The SkyTech. Blk 2 #05-11 Bukit Batok Street 24. Singapore 659480 Tel:65-67415738 Fax:65-67444696 Email: comlec@pacific.net.sg or sales@comlec.com

©copyright 2001~2008 Comlec Pte Ltd. All rights reserved. Disclaimer updated 20 February 2008