Exceptionally low tack cleanroom tape. For use on sensitive surfaces such as disks, wafers, and equipment. No residue. Often used for environmental protection during further processing, shipping and handling. Minimum stretch. 

Medium-tack, easy release vinyl is suitable for general construction and maintenance. For use in non-critical environments and early cleanroom construction phrases. 

This new high tech product replaces ordinary duct tape for your critical environment applications. Excellent holding power yet leaves no residue. Compared with ordinary duct tape, DUCtape withstands higher temperature range (-20 to 200 F) and a higher adhesion level. It provides a tight seal against moisture and vapors, has low metal and minimum outgassing.

Adheres lightly to plastics. #1110 stretches easily around corners, has low metals content, and is designed specifically for sealing wafer boxes. #1110 is commonly used for color-coding, and other cleanroom uses. No residues after prolonged storage. Releases easily from the roll with low static charge. Roll length is 36 yards(32.92m). Clean and double bagged. 3"(7.6cm)core. Silicone free. Nine glossy colors. 

See-through #1112 has a slightly higher tack than #1110, and adheres "just right" to polyethylene bags in vacuum sealing of wafer boxes. It is also ideal for automated tape dispensers. Silicone free. Roll length is 36 yards (32.92m). Clean and double bagged. 3"(7.6cm) core. Clear only.

This new tape is for use both by fab operators and construction personnel. #1154 has quick-stick properties and zero residue. Low outgassing & metals content. (See outgassing graphs). Whereas the #1153 has a high tack for hanging plastic, the #1154 has a medium tack for general cleanroom use.

A low stretch, medium tack tape. No residue. Good for sealing bags, wafer boxes, and light duty construction. Glossy appearance. Long life adhesive will last for years under normal conditions. Color: White Only.

Exceptionally low tack cleanroom tape. For use on sensitive surfaces such as disks, wafers, and equipment. No residue. Often used for environmental protection during further processing, shipping and handling. Minimum stretch. Translucent blue. 

Designed for quick bonding to films, cleanroom paper, general desktop use with tape dispenser. Low Metal. Moderate adhesion. Works at elevated temperatures. Standard size 3/4". Colors: Clear only.

Ideal for hanging heavy plastic sheeting, temporary walls, taping wheels, taping ductwork, colorful floor marking (adheres to concrete), and any application where you need a strong adhesive bond. Use far less tape than with vinyls. No residues, tears by hand, write on with pen. Multiple Colors.

This new tape is for use both by fab operators and construction personnel. #1154 has quick-stick properties and zero residue. Low outgassing & metals content. (See outgassing graphs). Whereas the #1153 has a high tack for hanging plastic, the #1154 has a medium tack for general cleanroom use.

Use these striped hazard warning tapes to designate the OSHA critical areas of your cleanroom. Durable vinyl withstands withstanding foot traffic. Length is 18 yards (16.46m).

Versatile vinyl tapes adhere to a variety of materials, including plastics and metals. Write on with pen, tear by hand, removes cleanly with low residue.

For operator and in-process use because it has a low unwind strength and medium tack. Contractors like the stretch for sealing and wrapping cleaned piping. Clean & double bagged. 36 yards (32.96m). Multiple colors.

This new high tech product replaces ordinary duct tape for your critical environment applications. Excellent holding power yet leaves no residue. Compared with ordinary duct tape, DUCtape withstands higher temperature range (-20 to 200 F) and a higher adhesion level. It provides a tight seal against moisture and vapors, has low metal and minimum outgassing. 

Medium-tack, easy release vinyl is suitable for general construction and maintenance. For use in non-critical environments and early cleanroom construction phrases. 
(See #1163 and #0163 for critical environments).
Width:2"only. Color: White only.

This premium tape has a strong no-stretch polyester film coated with a special conductive adhesive. Electrical resistance is 50,000~100,000 ohms/cm. Static is virtually zero during unwind and application. Used for in-bath circuit board processing, conformal coatings, sealing anti-static bags and static protection across sealed areas. Withstands temperatures of up to 150C (300F) for 2 hours. 72 yards (65.84m). Ask about ESD symbol printed options. Silicone-free. Color: Dark gray.

High temperature polyamide film with silicone adhesive. Withstands temperatures up to 600F (315C). Static charge <50 volts upon removal. Used to mask circuit boards during wave solder or hot air leveling. Clean and double bagged. 3" plastic core. 

High temperature polyamide film with silicone adhesive withstands temperatures over 500F (260C) for over one hour. Tolerates up to 550F. Hot air-leveling tape. Clean removal. Clean & double bagged. 3" plastic core. 

A non-stretch anti-static plastic film. Surface resistively 109 ohms. Charge upon unwinding 100 volts max. Use for general ESD concerns such as sealing anti-static bags, boxes, and static protection across sealed areas. Use for packaging of electronic parts and components, medical instruments, and precision mechanical equipment, and splicing of film. Length 55 yard (50m). Clean and double bagged. 3" plastic core. Contains no silicone. 

This is cleanroom version of product #0117. This tape is naturally anti-static. 100 volts max upon removal from most surfaces. 3" Plastic core. Clean and double bagged.

The workhorse of the anti-static industry. This special cellophane tape is naturally anti-static. 100 volts max upon removal from most surfaces. Used for general sealing and packaging. Cardboard core. 

Conductive grids embedded between two strong polypropylene layers. Approx. 100 volts max upon removal from most surfaces. Static shielding as well. No residues. Cardboard Core. 3 6 yards. Silicone free. 

Let everyone know to be careful in your ESD sensitive area. Yellow tape printed with "ESD Safeguarded Work Area", and over-laminated for floor marking. Removable adhesive. This tape is not anti-static. Cardboard core. 36yard length. Widths: 2" or 3" only.

This cleanroom tape and its plastic core materials of construction allow you to autoclave the entire roll. 240F(115C) for 30+min. Write on with ball-point pen. Nine multiple colors. Tape widths as low as 1/4". Low residues. Note that a small weight should be placed on the roll during autoclaving to prevent the roll form telescoping. Length is 50 feet (15.25 m). Color: White, Blue, Green, Yellow, Clear, Black, Red, Orange, and Purple.

Used for sealing packages for sterilization and changes color indicating proper sterilization. This tape has good adhesion to both woven and non-woven fabrics with no tape residues. 60 yards (54.9m). Color: Natural.